04 Jun Autoslide Smart Tag Pet Door Kit
If you are worried about the neighbor’s cats or unwanted animals entering your home via the motion pet sensors, the Autoslide Smart Tag Pet Door Kit is what you need. The Smart Tag uses RFID technology to communicate with a receiver to activate your Autoslide enabled sliding door securely.
[block class=”aligncenter full-frame”][/block]
Only one Smart Tag receiver is required per pet door and plugs into the back of the Autoslide system using the included cable. The sensor has three ranges: 3 feet, 6 feet, and 10 feet. You will want to mount your receiver in the most optimal place. If you are using this for pets, be sure to take into account how your pets behave. With the Smart Tag’s RFID technology, you won’t have troubles detecting your tags inside or outside of the home.
The Smart Tag system can currently handle of up to four (4) RFID tags.
Note: Autoslide does not assume any responsibility or liability for unwanted animals entering the house by following closely behind unknowing pets or running in just before door closes!
Autoslide Smart Tag Pet Door Kit Includes
- One Autoslide drive system
- One aluminium cover
- One mounting bracket
- Two Wall Mounted Wireless Push Buttons
- One Smart Tag Set (1 x RFID receiver and 2 x Smart Tags)
- One Low voltage plug-in power pack
- Two 20″ racks with assembly kit
- Friction Tester
- Installation screws and Allen key
- Instruction booklet & Installation DVD